BMW R100 / R80 – Monolever – MG-CB-366-TRWL-RTB YSS Suspension Topline Custom Shocks
$1,100.00 – $1,250.00 AUD
or 4 fortnightly payments from $275.00
with
$200 Min Spend. AU Customers Only. More info
These BMW R100 / R80 (and other R series models) YSS suspension replacement rear shock absorbers from the Topline range, are a high efficiency gas shock absorbers that can be adjusted according to the user. These are designed for BMW R series bikes with a monolever shock arrangement. For dual shock counterparts, head back to our BMW shock ranges.
There are 5 main features to this shock:
1. It has a threaded preload adjuster which the user can turn in order to personalize their setting.
2. It has rebound adjustment.
3. Hi and Lo compression adjustment
4. It has length adjustment of +/- 5mm.
5. The shocks are completely serviceable.
There is also the option to fully customise the look and length of your BMW R Series shocks in a number of ways via our partner in Netherlands – YSS Suspension Store. Check out the options below:
The following length options apply:
1. Custom – Shock length: 410mm (390, 400, 420, 430, 440 specially requested) (designed Specifically for BMW Bobber / Cafe Racer conversions).
Colour options (which can be used on either standard, or custom shock lengths):
Aluminium (Standard), Black, Gold, JPS Gold, Top Gun Red, Diamond Silver, Naranja Orange, BMW M-Sport.
Or check out the colour chart by scrolling to the bottom of the page.
Spring colour options:
Black (standard), Yellow, Red, Polished, White, Blue, Orange, Nardo Grey.
For additional details and compliance information check out the Additional Information tab below.
Note that for BMW M-Sport Variations the standard spring colour is BMW Blue
Note that for Gold JPS Variations the standard spring colour is Black
Note that for TopGun Red Variation the standard spring colour is Black
Note that for Diamond Silver variation the standard spring colour is Black
Note that for Naranja Orange variation the standard spring colour is Black.
What comes in the box?
YSS BMW R Series Suspension – What comes with it?
1. Single adjustable shock absorber to your specification.
2. Allen key and rod to dial in your preload settings.
Product Fitment
These shocks are suitable for all R100, R90, R80, R65 and others which have a monolever shock arrangement. These are custom for 410mm length typically used in Bobber or Cafe Racer Conversions. (390,400, 420, 430 or 440mm length can also be ordered on special request by selecting them as an option in the drop down menu).
YSS Custom Length Details:
– PRODUCT GROUP: Topline custom built
– PRODUCT TYPE: Emulsion gas shock absorber
– TÜV approved product: yes
– ABE: no
– LENGTHS: 390mm, 400mm, 410mm, 420mm, 430mm, 440mm
Disclaimer
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely, particularly where vehicle performance may change from the original specification. There is an element of risk associated with any modification and it is up to you to ensure these risks are minimised and taken into account. Further, some components may not be suitable for installation as a result rules and regulations. It is your responsibility to ensure that all legal requirements are met, relevant to your country and/or jurisdiction. JAX Garage takes no responsibility for any damage or injury as a result of any component or vehicle modification.
Additional information
Weight | 2.5 kg |
---|---|
Dimensions | 45 × 30 × 15 cm |
Brand | YSS Shocks |
Fitment | BMW R100, BMW R65, BMW R80, BMW R90 |