Motogadget mo.lock NFC wiring harness

$89.00 AUD

Low Stock
Ready for dispatch, limited availability

Mo.lock NFC wiring harness as a complete solution, the mo.lock wiring harness enables very quick and easy installation of the mo.lock in the vehicle electrical system.
Simply plug the relay supplied with the mo.lock into the matching relay socket of the wiring harness, connect three prepared cables to the mo.lock and connect two eyelets to the battery terminals – done!
- +
SKU: MLOCK-harness Categories: , ,

Features

As a complete solution, the mo.lock wiring harness enables very quick and easy installation of the mo.lock in the vehicle electrical system.

Simply plug the relay supplied with the mo.lock into the matching relay socket of the wiring harness, connect three prepared cables to the mo.lock and connect two eyelets to the battery terminals – done! No soldering or crimping is required. All cables are pre-assembled and the integrated 40A main fuse protects the new wiring system centrally and safely.

  • Cable from relay via fuse to +12V and ground: 60 cm
  • Cable from relay to mo.lock NFC: 150 cm
  • Cable from relay to on-board power supply: 150 cm
  • integrated relay socket
  • integrated 40A vehicle main fuse
  • Pre-assembled battery connection (M6 ring lugs)

Note: The mo.lock NFC wiring harness is not required if the mo.lock NFC is to be connected to a mo.unit blue/basic. The mo.lock NFC connection cable (SKU 4002012) can be used for this.

Product Fitment

  • Dimensions: 32mm diameter / 12mm depth
  • Weight: 35 g
  • Mounting: M3 thread on rear and bracket with 2 holes
  • Operating voltage: 8 – 18 V
  • Quiescent current consumption: 750µA (after 8 days)
  • Operating temperature: -20° to +80°C

NOTE: We do not recommend using the mo.lock combined with immobilizers! Contact your dealer/manufacturer for information about the possible deactivation of the immobilizer.

What comes in the box?

Wiring harness specific to mo.lock NFC

Additional Information & Disclaimer

Disclaimer

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely, particularly where vehicle performance may change from the original specification. There is an element of risk associated with any modification and it is up to you to ensure these risks are minimised and taken into account. Further, some components may not be suitable for installation as a result rules and regulations. It is your responsibility to ensure that all legal requirements are met, relevant to your country and/or jurisdiction. JAX Garage takes no responsibility for any damage or injury as a result of any component or vehicle modification.

Weight 0.15 kg
Dimensions 20 × 10 × 8 cm
Brand

Motogadget

Fitment

Universal

Reviews