This kit is suitable for BMW K75, K100, K100RS16V, K1 & K1100 bikes ranging from early 80’s to early 00’s.
The complete kit is delivered fully assembled and should not be taken apart, due to thread-locker being used at the bolts. The rear mounting point fits the standard BMW stud, push it on and mount the nut. The triangular shaped raw steel part must be welded in the main chassis of the BMW. The raw steel front mounting bracket must be welded to the triangular part in the chassis. If you mount the kit on your bike, make sure it lines up straight to the front and make sure the shock absorber is in parallel with the swing-arm. This will mark the spot where the front mounting point must be welded to the chassis. After this, you can paint or powdercoat the complete chassis, after that, the spherical bearing can be pressed in, c–clips on both sides, o–rings and then press the anodised aluminium bushes in the bearing.
All welding should be done by a professional.
YSS Suspension BMW SideWinder K-kit – What comes with it?
- Fully assembled Sidewinder aluminium bracket and shock absorber.
- Steel bracket for welding.
- Spherical bearing, c-clips and o-rings to fit.
Disclaimer
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely, particularly where vehicle performance may change from the original specification. There is an element of risk associated with any modification and it is up to you to ensure these risks are minimised and taken into account. Further, some components may not be suitable for installation as a result rules and regulations. It is your responsibility to ensure that all legal requirements are met, relevant to your country and/or jurisdiction. JAX Garage takes no responsibility for any damage or injury as a result of any component or vehicle modification.
Weight |
2.5 kg |
Dimensions |
45 × 30 × 15 cm |
Brand |
YSS Shocks
|
Fitment |
BMW K100, BMW K1100, BMW K75
|
Bracket Colour |
RAW Aluminium (+ $0), Aluminium Anodised (+ $80), Black Anodised (+ $80), Gold Anodised (+ $80), Red Anodised (+ $80), Blue Anodised (+ $80), Orange Anodised (+ $80), Chrome Powdercoated (+ $80), Nardo Grey Powdercoated (+ $80), White Powdercoated RAL9016 (+ $80), Red Powdercoated RAL3020 (+ $80), Blue Powdercoated RAL5010 (+ $80), Blue Powdercoated RAL5015 (+ $80), Gold Chrome Powdercoated (+ $80), Gulf Blue Powdercoated (+ $80)
|
Shock Colour |
Aluminum Anodised (+ $0), Black Anodised (+ $80), Gold Anodised (+ $80)
|
Spring Colour |
Black (+ $0), Chrome (+ $70), Nardo Grey (+ $70), White RAL9016 (+ $70), Red RAL3020 (+ $70), Blue RAL5010 (+ $70), Blue RAL5015 (+ $70), Gold Chrome (+ $70), Yellow RAL1003 (+ $70), Orange RAL2004 (+ $70), Gulf Blue (+ $70)
|