HIGHSIDER LED 7-inch Type 8 Headlight
or 4 fortnightly payments of $199.75 with $200 Min Spend. AU Customers Only. More info
HIGHSIDER LED main headlight FRAME-R1 TYPE 8, E-approved
– Mounting WITHOUT housing, there goes a light. –
Every centimeter counts to place the headlight as close as possible between the two standpipes in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. With the puristic aluminium ring it is possible for the first time to mount different LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlamp housing, an unbeatably narrow installation position is made possible and, in addition, better cooling of the LED unit is achieved.
On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to autumn and in times when cars are increasingly equipped with bright daytime running lights. Whether it’s to replace for better visibility at night, better visibility during the day, or to give your bike a nicer look, if you’re looking for a stylish and innovative power headlight, the FRAME-R1 LED main headlight is an excellent choice.
The installed LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light switching on the vehicle is given without additional control boxes or switches, fulfils the regulations and simplifies the installation. An LED bend lighting headlamp for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlight with cornering light, offers clear advantages over a conventional headlight. The static cornering light activates an additional light when the motorcycle is tilted. Due to the improved illumination you can see more of the curve and what is behind it. The driver can better adapt to the conditions and situations and is safer on the road. Two ellipsoidal lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing unique look. The headlamp is available with a lower or side mounting.
Switching from daytime running light to low beam: Press the high beam/light horn button briefly (approx. 1 second) and release the button as soon as the low beam is active. Then the low beam is permanently active.
The side-mount holders can be mounted in three positions, this compensates for 32mm in mounting depth and 46mm in width.
– Round 7 inch headlight with CNC mounting ring and mounting kit
– Mounts WITHOUT a headlight housing
– Improves cooling
– Many installation options
– Low profile installation
– Modern look, stylish-innovative
– Tinted glass
– Reflector black
– High beam, low beam, daytime running light, position light and cornering light function
– E-approved, nothing has to be registered
Give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight!
Available on back-order
What comes in the box?
Scope of delivery: 1 piece
A diameter = 200 mm
GA diameter = 169 mm
I diameter = 166.5 mm
T = 59 mm
R = 10 mm
Total depth from glass to cooling fins: 99.10 mm
Power input: 3 pin connector
Red wire = low beam (+)
White wire = high beam (+)
Black wire = ground (-)
Separate wire (round connector):
Red cable = LED position light / TFL (+)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely, particularly where vehicle performance may change from the original specification. There is an element of risk associated with any modification and it is up to you to ensure these risks are minimised and taken into account. Further, some components may not be suitable for installation as a result rules and regulations. It is your responsibility to ensure that all legal requirements are met, relevant to your country and/or jurisdiction. JAX Garage takes no responsibility for any damage or injury as a result of any component or vehicle modification.
|Dimensions||20 × 5 × 10 cm|