Honda CB750 F Front Fork Conversion Kit (CBR 929/954/1000 RR Forks) – 6 Series

$720.00 AUD

A custom designed plug and play installation to remove those old Honda CB750 forks and replace them with more advanced CBR 929/954/1000 RR upside down forks for your custom project. This easy to install modification will instantly change the performance, look and feel of your custom CB750 Series build.

These custom triple clamps are manufactured using 6061 T6 Aluminium and offer great functionality and custom JAX Garage styling.

Refer to the specifications below for additional information regarding fitment, application and compatibility.

- +
SKU: KIT-TCHSCB7505030-1 Category:

Description

Helicoiled auxiliary attachment holes

All JAX Garage components are designed not only to look and feel good but also be durable and practical. That’s why we’ve included helicoiled auxiliary mounting holes underneath the top triple clamp. Perfect for fitting aftermarket speedometers of your choice.

Honda CB750 F Front Fork Conversion Kit (CBR 929/954/1000 RR Forks) - 6 Series 5
Honda CB750 F Front Fork Conversion Kit (CBR 929/954/1000 RR Forks) - 6 Series 6

Pre-pressed head stem and bottom bearing

Whilst we always recommend that our components are installed by a qualified mechanic, all the hard work has already been done. The kit ensures that the head stem and bottom bearing are pressed on, making the installation a breeze.

We’ve also added two helicoiled mounting holes either side, along with adjustable steering stoppers to suit the needs of your build.

What comes in the kit?

– Bottom triple clamp with pressed-in head stem and bottom bearing.
– Top triple clamp.
– Top bearing.
– 2x steering stoppers and 2x stainless steel bolts to suit.
– 4x bottom triple clamp stainless steel bolts.
– 2x top triple clamp stainless steel bolts.

Additional information

Weight 2.95 kg
Dimensions 38 × 34 × 12 cm
Additional Information

Material: 6061 T6 Aluminium

This kit comes with the following:
– Bottom triple clamp with pressed-in head stem and bottom bearing.
– Top triple clamp.
– Top bearing.
– 2x steering stoppers and 2x stainless steel bolts to suit.
– 4x bottom triple clamp stainless steel bolts.
– 2x top triple clamp stainless steel bolts.

Compatible with all 1979-1982 CB750 F models: Note that steering will differ between models. Adjust steering locks as per vehicle stopper.

Compatible forks:
– Any forks with a top clamp diameter of 50mm and bottom 54mm i.e. CBR 929 RR (2000-2001), CBR 954 RR (2002 -2003), CBR 1000RR (2004-2007).
– Other CBR or Ohlin’s fork models may fit, however, lengths and axle spacing needs to be identical to the above listed models.
– Note the headstem offset is changed from the original of 50mm to 30mm (CBR offset).

Disclaimer:
Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely, particularly where vehicle performance may change from the original specification. There is an element of risk associated with any modification and it is up to you to ensure these risks are minimised and taken into account. Further, some components may not be suitable for installation as a result rules and regulations. It is your responsibility to ensure that all legal requirements are met, relevant to your country and/or jurisdiction. JAX Garage takes no responsibility for any damage or injury as a result of any component or vehicle modification.